GUNPRIMER: RASER ORIGIN R-GR-RE1

RASER ORIGIN is a revolutionary sanding tool that can easily remove gates using its proprietary Super-Nano Technology that leaves no scratches on the surface. Experience a new way of removing gates without stress.

Official Preview Video 

SPECIFICATIONS

1. Company: GUNPRIMER

2. Model: RASER ORIGIN

3. Tagline: Gate Remover

4. Components: RASER ORIGIN x 1, STORAGE CASE x 1

5. Material: Tempered Glass

6. Product Code: R-GR-RE1

7. Country of Origin: Republic of Korea

8. Package Size: 72 x 122 x 23mm / Weight: 46g

9. Product Size: 90 x 11 x 4mm / Weight: 8g

In addition, a total of 1,054 reinforcing tapes are listed, so a single sheet can be used for several dozen mechanical models.

■ How to use

1. Select and paste a joint guard with a size that covers about 2/3 of the loose parts.

2. Use one to three sheets according to the degree of looseness if necessary.

3. When holding heavy parts, attach a small amount of instantaneous adhesive to the side of the tape and dry it. (See the video2 below)

【Important】

1. Be sure to remove the grease and dust from the surface before applying. 

2. All parts are ready to operate immediately after the JOINT GUARD is attached. However, for ball joints supporting heavy parts, it is recommended to start after 24 hours after applying a small amount of super glue.